What is validating identity in wireless connection

06 Mar

There could be many problems here but the most basic answer I can give you is that maybe the router and wireless card are not compatible with each other.There are a few different types like A, B, G and the new one N.First box says Hardware enabling driver, second box says Software applications. I was happy to see that, when I accessed her wireless network, instead of almost instantly getting the [endless] certificate/Validating routine, I got that familiar opening of the box (Wireless Network Connection) with Type the key, and then click Connect. Disable the computer's wifi adapter and enable the ethernet port and reboot the computer. On the left side you will see "Change order of preferred networks" click on it.As opposed to deletion and reinstalling, via the device manager, I figured I'd give it a try, updating the Broadcom 802.11b/g WLAN. After typing in the Network Key that is on the ARRIS modem, lo & behold, I got an [endless] Acquiring network address. This will get your mom on the interent and you can piddle around with the wifi access at some later time. Then find the network name, click on it, then click "Properties"Go to the second tab "Authentication"Unclick the box "Enable 802.1x authentication for this network"That should fix your problem You asked "why wireless"?If your PC can see the network while it is open, then I'd lock down the MAC address tab first and look again to see if your PC can connect.If it does, then next enable your other security protocol, put the password into the PC and see if it continues to connect. check to see if you have any Anti Virus or internal firewalls (like Zone Alarm) active.

what is validating identity in wireless connection-88what is validating identity in wireless connection-65what is validating identity in wireless connection-5what is validating identity in wireless connection-64

She's always used wireless from the get-go, and in her particular situation/setup, where the cable goes to her entertainment center, it would be impractical to run an extension coax cable as well an an extension AC cord over to the modem.I added the AP as a client with and have tried using both RADIUS Standard and Cisco as the RADIUS type.I configured the IAS policy to grant access to Domain Computers, Authentication is set to PEAP and uses a private cert issued by our CA, the other profile settings are all default.Also, make sure that you are using WPA(2) Personal (PSK) for both the Comcast gateway, and for the Wi Fi client that you are setting up; don't try to use "WPA-Enterprise" or "802.1X" security because that almost certainly will require resources that you don't have (resources such as a security certificate for that connection).I can't provide you with a screen shot of how to do this because I don't have access to the Comcast gateway that you are using, or to a setup screen for your unnamed Wi Fi client. She still has the original box that the computer came in along with a bunch of discs, including the Driver Recovery CD.